Cement Industry

Cement plants operate around the clock, the machines are subjected to harsh operating conditions such as temperature, vibration, shock loads and high contamination. These conditions make the machine constantly subject to wear and tear, making maintenance and repair a very difficult task. In such a harsh environment, the bearings, open gear, gears, conveyors, and lubricants must meet the highest demands. The first is to choose the right lubricant, because there is no standard solution for many applications in this industry.

Depending on the operating mode and location of use, you must use different lubricants that are made up of different base oils, additives, viscosity, and consistency. Making the wrong decision can lead to early component failure or even stop production, leading to high maintenance costs and production losses. In addition, your plant must run efficiently and cost-effectively with minimal environmental impact.

Klüber lubrication assists you by providing special solutions tailored to these requirements of the cement industry. We offer a range of lubricants specifically tailored to the needs of the cement industry in critical applications. We assist you in selecting the right lubricant and your partner from conversion to routine testing, from lubricant sampling and lubrication system setup to optimization of lubricant quantity.

Our long experience of over 80 years in industrial lubrication and strong cooperation with well-known OEMs helps us develop the right lubricant to ensure high reliability, optimal consumption and attainment design life.
View more details on Kluber's Website
Features, Application
Operational lubricant for large girth gear drives
Kluberfluid C-F 3 Ultra is a lubricant of a new generation, developed specifically for the lubrication of medium-size to large girth gear drives. It is based on synthetic hydrocarbons and mineral oil. It provides good adhesion, excellent resistance to high pressure and protection against wear. This product is suitable for use at component temperatures up to 120°C.
Kluberfluid C-F 3 Ultra meets the requirements of ANSI/AGMA 9005-E02 annex D-2.
Operational lubricant for large girth gear drives
Kluberfluid C-F 8 ULTRA is a newly developed lubricant especially for use on medium-size to large girth gear drives. It is based on a mixture of synthetic hydrocarbons and mineral oil.
Kluberfluid C-F 8 ULTRA provides extremely good adhesion, resistance to high pressure and exceptional wear protection. It is suitable for use at component temperatures up to 120°C.
Kluberfluid C-F 8 ULTRA corresponds to ANSI/AGMA 9005-E02 annex D.
Operational open gear lubricant for large girth gear drives
Kluberfluid C-PG 17 Ultra is based on an innovative synthetic base oil and was developed to meet your increasing demands of modern day open gears.
The high viscosity index of Kluberfluid C-PG 17 Ultra provides the highest film thicknesses and thus the highest load carrying capacity, even if your gears are running at elevated temperatures.
It exceeds the requirements of ANSI/AGMA 6014-B15 Annex D and FLSmidth Minerals Gear Set Lubrication Guidelines.
Operational lubricant for large gear drives
Klubersynth OA 98-15000 is based on the SLIBF concept (Solid Lubricant Integrated Base Fluid) was developed precisely to meet the high demands of open gear drives.
It provides excellent adhesion, good film formation, less splashing from the gears and reducing leakages from the gear casing. This results in better maintenance practices and increased safety. It also provides good pumpability at lower temperatures and offers low resistance to pumping the lubricant.
Open Gear Lubricants
Kluberlub OG 11 BH Series are Open Gear Lubricants based on mineral oil, Aluminum Complex Soap thickener and MX technology based on Organo Molybdenum Complex.  
The high viscosity base fluids used in the lubricants provide extreme pressure (EP) and antiwear characteristics to the lubricant.
Operational lubricant for open drives
Grafloscon C-SG 2000 Ultra is a sprayable adhesive lubricant with a mineral base oil. It contains aluminium complex soap and solid lubricant particles of fine graphite. It is resistant to high pressure and contains antiwear additives, adhesion improvers and corrosion inhibitors. The raw materials used for the manufacture of Grafloscon C-SG 2000 Ultra are free of bitumen, solvents and chlorine.
 Trang:    1  2  3  4 
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16