Wood Industry


The lubricant used in the woodworking industry must meet high requirements, not only withstand high temperatures, chemicals and harsh environments while evaporation must be low. Especially when used in continuous molding machines to produce particle board, where the temperature can reach 250ºC. Standard oil products are not enough to lubricate steel conveyors, chains and rods.

Klüber have been working together with machine manufactures and wood processing plants for many years. Based Klüber’s experience, Klüber continuously develop new lubricants suited to your need the requirements of increasingly high equipment. Klüber new oils reduce the power expenditure of your machines and improve their efficiency even at very high temperatures. Klüber high-performance lubricants also show low evaporation losses and do not form varnish build-up on the steel belts, avoiding smoke formation during production while reducing your oil consumption. Bring long-term economic efficiency to customers.

OEM recommendation: Siempelkamp/Dieffenbacher/Küsters/IMAL
View more details on Kluber's Website
Product
Features, Application
High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP...series with further development in terms of evaporation losses at temperatures between 230 and 260°C.
Synthetic high-temperature chain oil
HOTEMP SUPER CH 2-100 is a synthetic high-temperature chain oil based on a low-viscous, solvent-free and thermally stable ester oil.
The special additives contained in HOTEMP SUPER CH 2-100 ensure good wear protection and lubricity.
HOTEMP SUPER CH 2-100 has only low evaporation losses at high operating temperatures.
High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.
High-temperature and long-term greases for rolling bearings subject to high temperatures in continuous presses
Klubertemp HB 53-391 and Klubertemp HB 53-392 are synthetic long-term greases based on perfluorinated polyether oils. They were especially designed for the lubrication of roller bearings subject to high loads and temperatures in continuous presses. Klubertemp HB 53 greases ensure a good oil supply to the bearing throughout the entire service interval and offer high thermal stability as well as corrosion protection.
High-temperature grease for slow-running bearings
Klubersynth BH 72-422 is a synthetic high-temperature grease containing ester as well as perfluorinated polyether (PFPE) oils, and a PTFE thickener. 
This grease shows good oil retention at high temperature and is thermally stable, which enables Klubersynth BH 72-422 to extend your relubrication intervals at operating temperatures above 160°C up to 220°C.
High-temperature lubricating grease
Kluberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions. Kluberlub PHB 71-461 may be applied via centralized lubrication equipment.
Kluberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions.
 Trang:    1  2 
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16