Kluberlub BE 41-1501

Manufacturer: KLÜBER LUBRICATION (Germany)
Heavy-duty grease for highly-loaded rolling bearings operating at low speeds
Kluberlub BE 41-1501 is designed to meet the requirements of rolling bearings subject to extreme conditions.
FAG FE 8 tests have confirmed the effectiveness of Kluberlub BE 41-1501 under these conditions and it is approved by various bearing manufacturers, e.g. FAG, to be used for applications in low-speed rolling bearings subject to very high loads and shocks, for example in roller presses and bowl mill crushers.
Benefits for your application
  • Kluberlub BE 41-1501 is approved by leading component OEMs, e.g. Flender and David Brown.
  • Excellent wear protection under the highest dynamic load conditions
  • Good load-carrying capacity at low rotational speeds
  • Reliable lubricant film formation at high service temperatures
  • Emergency lubricating properties due to the addition of special solid lubricants

Orther products

Product
Features, Application
Open Gear Lubricants
Kluberlub OG 11 BH Series are Open Gear Lubricants based on mineral oil, Aluminum Complex Soap thickener and MX technology based on Organo Molybdenum Complex.  
The high viscosity base fluids used in the lubricants provide extreme pressure (EP) and antiwear characteristics to the lubricant.
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.
High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.
Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Kluber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.
Light-coloured running-in and correction lubricant for open gear rim/pinion drives
Kluberfluid B-F 2 Ultra is a mineral-oil-based running-in and correction lubricant especially developed for immersion, circulation or spray lubrication.
It contains special additives and surface-smoothing solid particles enhancing the running-in process, i.e. physical/mechanical material removal on new tooth flanks.
Kluberfluid B-F 2 Ultra is a fluid grease that is free of bitumen and raw materials containing solvents, heavy metals or chlorine.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16