Kluberlub NH1 11-231

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Multi-purpose grease for food-processing and pharmaceutical industries
PARALIQ GA 343 is a lubricating grease based on paraffinic mineral oil and an aluminium complex soap.
PARALIQ GA 343 is resistant to cold and hot water.
PARALIQ GA 343 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. It is a contributor towards the supporting of food safety. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Kluberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on PAO satisfying the growing requirements and increasing power density of modern gears.
These are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

High-temperature long-term greases
Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.