Klubersynth GEM 4-1000 N

Open Gear Lubricants
Kluberlub OG 11 BH Series are Open Gear Lubricants based on mineral oil, Aluminum Complex Soap thickener and MX technology based on Organo Molybdenum Complex.  
The high viscosity base fluids used in the lubricants provide extreme pressure (EP) and antiwear characteristics to the lubricant.

High-temperature long-term greases
Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.

Multi-purpose lubricant for high-temperature applications
Klubertemp GR AR 555 is a white, homogeneous long-term grease based on a perfluorinated polyether oil (PFPE) and polytetrafluoroethylene (PTFE).
Klubertemp GR AR 555 offers good corrosion protection and high evaporation stability especially for high-temperature applications.

High-temperature lubricating grease
Kluberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions. Kluberlub PHB 71-461 may be applied via centralized lubrication equipment.
Kluberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions.

Operational lubricant for large girth gear drives
Kluberfluid C-F 3 Ultra is a lubricant of a new generation, developed specifically for the lubrication of medium-size to large girth gear drives. It is based on synthetic hydrocarbons and mineral oil. It provides good adhesion, excellent resistance to high pressure and protection against wear. This product is suitable for use at component temperatures up to 120°C.
Kluberfluid C-F 3 Ultra meets the requirements of ANSI/AGMA 9005-E02 annex D-2.

Operational lubricant for large gear drives
Klubersynth OA 98-15000 is based on the SLIBF concept (Solid Lubricant Integrated Base Fluid) was developed precisely to meet the high demands of open gear drives.
It provides excellent adhesion, good film formation, less splashing from the gears and reducing leakages from the gear casing. This results in better maintenance practices and increased safety. It also provides good pumpability at lower temperatures and offers low resistance to pumping the lubricant.