Kluberfood NH1 94-6000

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. It is a contributor towards the supporting of food safety. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

White lubricating and assembly paste for the food-processing and pharmaceutical industries
Kluberpaste UH1 84-201 is a white lubricating and assembly paste for versatile lubricating and assembly purposes in hygienically sensitive environments.
The lubricant is water-resistant and provides good corrosion protection.
The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Lubricating grease for the food and pharmaceutical industries
Kluberlub NH1 11-231 is based on a paraffin mineral oil and an aluminium complex soap.
Kluberlub NH1 11-231 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Adhesive dampening greases of medium to high shear viscosity
CATENERA KSB 6, 8, 12 are adhesive dampening greases based on synthetic hydrocarbon, ester and paraffin oil. They contain silicate as thickener.
CATENERA KSB 8 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.

Special lubricating grease for the food and pharmaceutical industries
PARALIQ GA 351 is a versatile lubricating grease based on an aluminium complex soap thickener.
It has no smell or taste. It is resistant to all aqueous or alcoholic media commonly found in the food industry.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food, cosmetics, pharmaceutical industries.