Kluberpaste ME 31-52

High-temperature and high-purity screw paste
In many chemical processes, contaminants like halogens, metal compounds and sulphur can cause undesirable secondary reactions. Therefore, lubricants used in the vicinity of such processes for e.g.flange connections in reactors should be free of such substances. Kluberpaste HS 91-21 complies with this requirement, as it offers a high degree of purity regarding sulphur, chlorine, fluorine and heavy metals.

Light-coloured high-pressure lubricating paste
DUOTEMPI PMY 45 is a light-coloured high-pressure lubricating paste for frictional connections subject to medium temperatures in predominantly dry environments. DUOTEMPI PMY 45 is based on mineral and synthetic hydrocarbon oils plus solid lubricants and special lithium soap. DUOTEMPI PMY 45 ensures easy assembly and disassembly of interference fits and clamping connections subject to medium loads while preventing fretting corrosion (tribo-corrosion).

Special paste for lubrication of plastic materials and prevention of stick-slip and noise
Kluberpaste R 11-502 is a special paste containing solid lubricants used for the lubrication and noise-prevention in plastic-plastic material pairings, e.g. in sliding or dampening elements made of thermoplastics, and in particular POM-POM pairings.
Due to the carefully designed combination with solid lubricants, the difference between static and sliding friction is minimised, which enables this paste to prevent creaking noises even in relatively elastic materials like plastics, and even under high loads.

High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.