Klubersynth UH1 64-1302

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Special synthetic lubricating oils for the pharmaceutical industry
Kluberpharma UH1 4-220/4-460 are specially designed synthetic lubricating oils for the lubrication of steel punches and bronze guides in pharmaceutical tablet presses, especially in the field of high-performance manufacture of tablets.
They are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Silicone spray
UNISILKON M 2000 Spray is a waterwhite, solvent-free silicone spray. It keeps rubber, plastic and leather surfaces smooth and supple.
UNISILKON M 2000 Spray is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.