Klubersynth BH 72-422

Air-hardening PTFE bonded coating
FLUOROPAN T 20 Spray is a whitish-transparent, air-hardening bonded coating based on PTFE and an organic binder.
When FLUOROPAN T 20 Spray has been applied and hardened, it offers high wear resistance, a low friction coefficient and no stick slip at low speeds. Its adhesion on iron and non-ferrous metals and solvent-resistant plastics as well as wood is good.

High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250°C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

High-temperature chain oil for transport- and conveyor chains in the automotive industry
Klubersynth CHX 2-220 is a high-temperature oil especially developed with the know-how of a leading automotive paint manufacturer. Due to its compatibility with modern cathodic immersion paint systems it increases process reliability for the operator.
The new type of ester base oil offers better resistance to ageing, and any residues are dissolved by relubrication with fresh oil. Residue formation is low, which means less maintenance and repairs.