Kluberlub BE 41-1501

High-purity rolling bearing grease for long-term lubrication
Kluberquiet BQH 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, Kluberquiet It is a rolling bearing grease with a particularly low noise level. It offers excellent performance characteristics thanks to a high-quality ester oil, a new polyurea thickener and special additives. It is special in that it combines high-temperature resistance and extreme purity.

High-temperature lubricating grease for bearings and valves
Kluberlub BVH 71-461 is a special lubricating grease based on mineral oil/synthetic hydrocarbon oil/polyurea. It has a wide service temperature range and is suitable for rolling bearings up to a service temperature of 160°C.
Kluberlub BVH 71-461 ensures excellent wear protection, and its EP additives provide a high pressure absorption capacity.
It is very adhesive and resistant to water under static and dynamic loads.
Kluberlub BVH 71-461 is also particularly resistant to oxidation and ageing and reliably protects against corrosion. It has an especially high sealing effect in coke oven valves.

Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.

High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.

Rolling bearing and high-pressure grease
STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water.

Operational lubricant for large girth gear drives
Kluberfluid C-F 3 Ultra is a lubricant of a new generation, developed specifically for the lubrication of medium-size to large girth gear drives. It is based on synthetic hydrocarbons and mineral oil. It provides good adhesion, excellent resistance to high pressure and protection against wear. This product is suitable for use at component temperatures up to 120°C.
Kluberfluid C-F 3 Ultra meets the requirements of ANSI/AGMA 9005-E02 annex D-2.