$Kluberoil Tex 1-22 N$

Kluberoil Tex 1-22 N

Manufacturer: KLÜBER LUBRICATION (Germany)

Anti-wear, biodegradable needle and sinker oils
In the knitting industry, requirements in terms of consistent product quality, compatibility of materials, wear protection and scourability are becoming more and more stringent. Kluberoil Tex 1-...N oils are special mineral base oils and additives. These oils are biodegradable according to OECD - 301 c.
These oils reduce wear and deposits on stitch-forming elements, thus ensuring long and trouble-free operation of knitting machines, while at the same time reducing operating costs.

Benefits for your application

Comply with the legal requirements set forth in EU Directive 2003/53/EC for placing NP/NPE-containing products on the market
Long service life of stitch-forming elements due to good wear protection and damping effect
Compatible with electronic control systems, elastane fibres and commonly used sealing materials and plastics due to the special base oils and additives
Higher economical efficiency of knitting machines due to reduced downtime
Reduction of operating costs due to extended maintenance intervals
Cost reduction in wet processing due to the good scourability of the needle oil

Orther products

Product

Features, Application

Klubertemp HM 83-402

High-temperature long-term greases
Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.

ISOFLEX PDP 65

Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.

Kluberplex BEM 41-132

High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.

Molybkombin UMF T 4 Spray

Air-drying, easy-to-apply bonded coating based on MoS₂
MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS₂), an organic binder and an inflammable solvent mixture.
MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450°C.

Klubersynth HT 2-220 CN

High-temperature oil for oil-lubricated stenters in the textile industry
Klubersynth HT 2-220 CN is a specialty synthetic chain oil for the high temperature applications, which can provide reliable lubrication and protection under high temperatures and high loads. This oil has very good adhesion and spreading property, which can quickly and effectively form the lubricating film in the lubrication points. Klubersynth HT 2-220 CN has very good anti wearing performance and load capacity.

Kluber Summit SH 32, 46, 68

Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416