High-temperature and long-term greases for rolling bearings subject to high temperatures in continuous presses
Klubertemp HB 53-391 and Klubertemp HB 53-392 are synthetic long-term greases based on perfluorinated polyether oils. They were especially designed for the lubrication of roller bearings subject to high loads and temperatures in continuous presses. Klubertemp HB 53 greases ensure a good oil supply to the bearing throughout the entire service interval and offer high thermal stability as well as corrosion protection.
Benefits for your application:
High profitability due to long service life of machines
Approved and recommended for continuous presses in the wood working industry
Less maintenance due to longer relubrication intervals
Synthetic high-temperature chain oil
HOTEMP SUPER CH 2-100 is a synthetic high-temperature chain oil based on a low-viscous, solvent-free and thermally stable ester oil.
The special additives contained in HOTEMP SUPER CH 2-100 ensure good wear protection and lubricity.
HOTEMP SUPER CH 2-100 has only low evaporation losses at high operating temperatures.
High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.
Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.
High-temperature lubricating grease
Kluberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions. Kluberlub PHB 71-461 may be applied via centralized lubrication equipment.
Kluberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions.
