Klubersynth CHX 2-220

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Synthetic high-performance gear and high-temperature oil with KluberComp Lube Technology
Klubersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol. It includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GH 6 is approved by Siemens-Flender, SEW, MAAG Gears, etc.

Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.

High-temperature oil for oil-lubricated stenter chains in the textile industry
Klubersynth CTH 2-260 is a special high-temperature chain oil for reliable lubrication at high operating temperatures and loads. It has low evaporation losses at high temperatures and does not form varnish build-up when used correctly - it is important to keep friction points covered with an oil film at all times. It also regenerates pasty used oil at the friction points to ensure sufficient lubrication. It also offers good creeping ability, ensuring quick lubricant film formation.

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.