Isoflex PDP 65

Manufacturer: KLÜBER LUBRICATION (Germany)
Synthetic long-term oils
ISOFLEX PDP oils are synthetic long-term oils based on ester oil. They show a good viscosity-temperature behaviour, a high flash point, a low pour point, good aging and oxidation stability as well as corrosion protection. Compared to mineral oils, they hardly change their viscosity at low or high temperatures thus ensuring less decrease in performance and reduced power consumption.
Benefits for your application
  • Synthetic long-term oils
  • Wide service temperature range
  • Low pour point
  • Good viscosity-temperature behaviour
  • Oxidation and ageing stability
  • Good corrosion protection

Orther products

Product
Features, Application
Operational lubricant for large girth gear drives
Kluberfluid C-F 8 ULTRA is a newly developed lubricant especially for use on medium-size to large girth gear drives. It is based on a mixture of synthetic hydrocarbons and mineral oil.
Kluberfluid C-F 8 ULTRA provides extremely good adhesion, resistance to high pressure and exceptional wear protection. It is suitable for use at component temperatures up to 120°C.
High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP... series with further development in terms of evaporation losses at temperatures between 230 and 260 °C.
Synthetic air compressor oils for oil change intervals up to 10,000 operating hours
Kluber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives. They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.
Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.
Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16