Kluberpaste UH1 84-201

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

Water-miscible sliding dispersion for windscreen wipers made of synthetic or natural rubber and other elastomer components
Windscreen wiper blades are subject to extreme and sometimes conflicting requirements. On the one hand wiper blades have to be structurally stable enough to resist mechanical stress during operation, on the other hand they have to have sufficient flexibility to ensure a satisfactory wiping pattern is achieved in contact with the windscreen. Optimum frictional behavior, especially in the dry/wet friction regime, is therefore of vital importance. Kluberplus S 02-004 has been designed especially for optimization of the frictional behavior of wiper blades. A secondary benefit of the lubricant is that assembly of the wiper blades is also much easier. This also applies to the assembly of other components, such as O-rings etc.. Once applied, Kluberplus S 02-004 forms a dry, flexible, sliding film which ensures prevention of stick slip sliding with minimal lubricant transfer to the mating surface, e.g. the windscreen.

High-temperature long-term greases
Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.

Special lubricating greases for elastomers
SYNTHESO GLK 0 and GLK 1 are special lubricating greases for a wide variety of applications with an almost neutral behaviour towards many elastomers (also EPDM) and plastics. Both products offer excellent wear protection, high load-carrying capacity, good adhesion and resistance to water.

Water-miscible, two-component bonded coatings with different contents of solid matter for automotive body seals
Klubertop TP 22-1310 N /A/B and Klubertop TP 27-1310 are black two-component bonded coating cross-linking at ambient temperature which contain special solid matter and an organic, water-miscible binding agent. The bonded coating offers good adhesion to e.g. EPDM, TPE, FPM, PUR etc.

High-temperature lubricating grease for low-noise rolling bearings
ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.