Asonic HQ 72-102

Water-miscible sliding dispersion for windscreen wipers made of synthetic or natural rubber and other elastomer components
Windscreen wiper blades are subject to extreme and sometimes conflicting requirements. On the one hand wiper blades have to be structurally stable enough to resist mechanical stress during operation, on the other hand they have to have sufficient flexibility to ensure a satisfactory wiping pattern is achieved in contact with the windscreen. Optimum frictional behavior, especially in the dry/wet friction regime, is therefore of vital importance. Kluberplus S 02-004 has been designed especially for optimization of the frictional behavior of wiper blades. A secondary benefit of the lubricant is that assembly of the wiper blades is also much easier. This also applies to the assembly of other components, such as O-rings etc.. Once applied, Kluberplus S 02-004 forms a dry, flexible, sliding film which ensures prevention of stick slip sliding with minimal lubricant transfer to the mating surface, e.g. the windscreen.

High-temperature long-term greases
Klubertemp HM greases are long-term lubricating greases based on perfluoropolyether oil and PTFE which has been specifically designed for high-temperature lubrication. Owing to the base oil viscosity and the high load-carrying capacity, Klubertemp HM greases are particularly suitable for the initial and relubrication of medium-speed rolling bearings subject to high temperatures and loads.

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

High-temperature chain oil for transport- and conveyor chains in the automotive industry
Klubersynth CHX 2-220 is a high-temperature oil especially developed with the know-how of a leading automotive paint manufacturer. Due to its compatibility with modern cathodic immersion paint systems it increases process reliability for the operator.
The new type of ester base oil offers better resistance to ageing, and any residues are dissolved by relubrication with fresh oil. Residue formation is low, which means less maintenance and repairs.

Water-miscible, two-component bonded coatings for automotive body seals
Klubertop TP 22, 27 and 31-1310 A/B are air-hardening, black two-component bonded coatings with varying solid matter content plus an organic, water-miscible binding agent. The products offer good adhesion to e.g. EPDM, TPE, FPM, PUR.