Staburags NBU 30

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250°C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Special lubricating grease for the food and pharmaceutical industries
PARALIQ GA 351 is a versatile lubricating grease based on an aluminium complex soap thickener.
It has no smell or taste. It is resistant to all aqueous or alcoholic media commonly found in the food industry.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food, cosmetics, pharmaceutical industries.

Lubricating greases for extreme requirements
Kluberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano - dynamical loads and good adhesion properties. Kluberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour.

Long-term grease for rolling and plain bearings
STABURAGS NBU 12/300 KP is a rolling and plain bearing grease based on mineral oil and a barium complex soap thickener. It offers good wear protection and good pressure absorption.
STABURAGS NBU 12/300 KP is resistant to water and protects reliably against corrosion.

Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.

High-temperature grease for rolling bearings
Klubersynth HB 72-52 is a synthetic high-temperature grease. It is based on special ester oil, a polyurea thickener and selected additives and covers a wide service temperature range. The grease is compatible with EPDM, offers excellent running times, good corrosion protection as well as water washout resistance.