PARALIQ GB 363

Lubricating greases for extreme requirements
Kluberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano - dynamical loads and good adhesion properties. Kluberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour.

High-temperature grease for rolling bearings
Klubersynth HB 72-52 is a synthetic high-temperature grease. It is based on special ester oil, a polyurea thickener and selected additives and covers a wide service temperature range. The grease is compatible with EPDM, offers excellent running times, good corrosion protection as well as water washout resistance.

Long-term corrosion preventive, effective rust remover
CONTRAKOR FLUID H 1 is a thin-bodied, versatile lubricant based on mineral oil.
This long-term anti-corrosion agent offers excellent lubricity, improves sliding and has good penetrating properties, which makes it highly effective for use as a rust remover.
It is particularly useful in workshops, where a wide variety of lubricating jobs require quick and uncomplicated handling.

Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.

Rolling bearing and high-pressure grease
STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water.