Catenera KSB 8

Lubricating grease for the food and pharmaceutical industries
Kluberlub NH1 11-231 is based on a paraffin mineral oil and an aluminium complex soap.
Kluberlub NH1 11-231 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Kluberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on PAO satisfying the growing requirements and increasing power density of modern gears.
These are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.

Synthetic lubricating oil for use in the food and pharmaceutical industries
PARALIQ 91 Spray is a food-grade lubricating oil based on a ester oil which has been developed as release agent for tins, moulds, cutting boards and other solid surfaces in contact with foodstuffs. It is neutral in odour and taste.
It is NSF H1, 3H registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries...