Kluberoil GEM 1-46...1000 N

Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Kluber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.

Synthetic high-performance gear oils for weaving machines
In modern weaving machines, high-performance gear oils are expected to enable longer maintenance intervals at high production speeds.
It is with this trend in mind that we developed our Klubersynth 50 KV, 80 KV and 100 KV oils. These are synthetic high-performance gear oils based on polyglycol. They are resistant to ageing, protect reliably against wear and offer an excellent load-carrying capacity as well as viscosity-temperature behaviour.

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

Mineral oil based flushing oil
Kluberoil GZ 1-100 BH is made with mineral base stocks and fortified with appropriate additivation. It is compatible with all mineral oil based lubricants/rust preventives, and common gear box seal materials.
Kluberoil GZ 1-100 BH is recommended for use in gear boxes using mineral oil lubricants. This oil helps to clean the old residues and traces of earlier lubricants in the gear box and also protects from corrosion.  This flushing oil is especially recommended for large gear systems with external circulation facility.

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. It is a contributor towards the supporting of food safety. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

Synthetic fluid gear grease for the food processing and pharmaceutical industries
Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener.
Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.