Klubersynth GEM 4-32….1000 N

High-performance fluid grease for long-term lubrication
Klubersynth BEM 44-4600 is based on high-viscosity PAO oil and a special lithium soap, which prevents components from leaking due to its thixotropic behavior. Compared to other fluid greases it provides a very good thermal stability due to its synthetic composition thus ensures a longer service life of the lubricant and protects against early wear of the components. It offers good compatibility with other fluid greases based on mineral oil and PAO, thus it helps in a smooth change- over to BEM 44-4600.

Fluid multipurpose grease for long-term lubrication
CENTOPLEX GLP 500 is a fluid multipurpose grease for the long- term lubrication at normal temperatures and high loads.

Synthetic fluid gear grease for the food processing and pharmaceutical industries
Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener.
Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

Mineral oil based high performance gear oils with MX technology
The Klüberoil MX 1 AP series gear oils are highly refined mineral oil based high performance gear oils for long life characteristics.MX technology works quickly by establishing a protective strong pressure resistant lubricating film in between the meshing surfaces & remains there in spite of heavy loads or shocks. Due to increase in contact area, load per unit area comes down resulting in reduced friction and heat generation. Apart from that, optimum percentage of additives present in these oils gives good resistance against oxidation and corrosion. 

High-performance gear and multipurpose oil based on mineral oil with KlüberComp Lube Technology
Kluberoil GEM 1 N is a high-performance gear and multipurpose oil based on mineral. Kluberoil GEM 1 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Kluberoil GEM 1 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.