Klubersynth GE 46-1200

Mineral oil based high performance gear oils with MX technology
The Klüberoil MX 1 AP series gear oils are highly refined mineral oil based high performance gear oils for long life characteristics.MX technology works quickly by establishing a protective strong pressure resistant lubricating film in between the meshing surfaces & remains there in spite of heavy loads or shocks. Due to increase in contact area, load per unit area comes down resulting in reduced friction and heat generation. Apart from that, optimum percentage of additives present in these oils gives good resistance against oxidation and corrosion. 

Mineral oil based flushing oil
Kluberoil GZ 1-100 BH is made with mineral base stocks and fortified with appropriate additivation. It is compatible with all mineral oil based lubricants/rust preventives, and common gear box seal materials.
Kluberoil GZ 1-100 BH is recommended for use in gear boxes using mineral oil lubricants. This oil helps to clean the old residues and traces of earlier lubricants in the gear box and also protects from corrosion.  This flushing oil is especially recommended for large gear systems with external circulation facility.

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. It is a contributor towards the supporting of food safety. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

High-performance fluid grease for long-term lubrication
Klubersynth BEM 44-4600 is based on high-viscosity PAO oil and a special lithium soap, which prevents components from leaking due to its thixotropic behavior. Compared to other fluid greases it provides a very good thermal stability due to its synthetic composition thus ensures a longer service life of the lubricant and protects against early wear of the components. It offers good compatibility with other fluid greases based on mineral oil and PAO, thus it helps in a smooth change- over to BEM 44-4600.

Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Kluberoil 4 UH1 N is a synthetic high-performance gear and multipurpose oil based on PAO satisfying the growing requirements and increasing power density of modern gears.
These are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Synthetic high-performance gear oils for weaving machines
In modern weaving machines, high-performance gear oils are expected to enable longer maintenance intervals at high production speeds.
It is with this trend in mind that we developed our Klubersynth 50 KV, 80 KV and 100 KV oils. These are synthetic high-performance gear oils based on polyglycol. They are resistant to ageing, protect reliably against wear and offer an excellent load-carrying capacity as well as viscosity-temperature behaviour.