Multi-purpose lubricant for high-temperature applications
Klubertemp GR AR 555 is a white, homogeneous long-term grease based on a perfluorinated polyether oil (PFPE) and polytetrafluoroethylene (PTFE).
Klubertemp GR AR 555 offers good corrosion protection and high evaporation stability especially for high-temperature applications.
Benefits for your application
For use at high operating temperatures up to 250°C
Air-hardening PTFE bonded coating
FLUOROPAN T 20 Spray is a whitish-transparent, air-hardening bonded coating based on PTFE and an organic binder.
When FLUOROPAN T 20 Spray has been applied and hardened, it offers high wear resistance, a low friction coefficient and no stick slip at low speeds. Its adhesion on iron and non-ferrous metals and solvent-resistant plastics as well as wood is good.
High-temperature lubricating paste
Wolfracoat C is a grey high-temperature lubricating paste containing metal solid lubricant pigments (e.g. copper, graphite). Wolfracoat C counteracts excessive friction, wear and seizing at lubricating points subject to high loads. Wolfracoat C forms a thermally stable lubricating film. At temperatures above 200°C, the solid lubricants remain in the friction points and protect against tribocorrosion and fretting of e.g. fits up to 1200°C.
Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings
PETAMO GY 193 is a synthetic high-temperature grease based on high-quality ester oils, polyurea thickener and special additives. The grease stands out for its excellent water resistance and corrosion protection.
With an above average base oil viscosity of approx. 160 mm²/s at 40°C, PETAMO GY 193 is suitable for manifold applications in machine building.
Air-drying, easy-to-apply bonded coating based on MoS2
MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS2), an organic binder and an inflammable solvent mixture.
MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450°C.
High-temperature chain oils
All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low.
Our synthetic ester oils clearly meet these requirements. With our Klubersynth CH 2 series, we have found the right solution for you.
High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250°C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.
