Klubersynth CTH 2-260

Synthetic oil for chains in can lacquering lines for the food-processing industry
Kluberfood NH1 C 6-150 is a special synthetic high-temperature oil on a PG base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

High-temperature chain oil for transport- and conveyor chains in the automotive industry
Klubersynth CHX 2-220 is a high-temperature oil especially developed with the know-how of a leading automotive paint manufacturer. Due to its compatibility with modern cathodic immersion paint systems it increases process reliability for the operator.
The new type of ester base oil offers better resistance to ageing, and any residues are dissolved by relubrication with fresh oil. Residue formation is low, which means less maintenance and repairs.

High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP...series with further development in terms of evaporation losses at temperatures between 230°C and 260°C.

High-temperature oil for oil-lubricated stenters in the textile industry
Klubersynth HT 2-220 CN is a specialty synthetic chain oil for the high temperature applications, which can provide reliable lubrication and protection under high temperatures and high loads. This oil has very good adhesion and spreading property, which can quickly and effectively form the lubricating film in the lubrication points.  Klubersynth HT 2-220 CN has very good anti wearing performance and load capacity.

High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.

Semi-synthetic oil for chains in high humid process areas for the food-processing industry
Kluberfood NH1 C 8-80 is a semi-synthetic chain oil developed for the lubrication of chains operating in high humidity for conveyor and drive chains. Its formulation, incorporating a special additive package, enables significant friction reduction and good protection against wear and fretting corrosion particularly in the highly stressed pin / bush areas.
Kluberfood NH1 C 8-80 has good chemical stability for acidic process environments like in pasta dryer applications (lactic acid) where other oils may contribute to residue build-up.
Kluberfood NH1 C 8-80 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.