Low-temperature greases for rolling and plain bearings
CENTOPLEX 1 DL/2 DL are low-temperature greases based on an oxidation-resistant mineral oil and a lithium-calcium soap. Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.
Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.
Long-term grease for low-temperature applications
Klubertemp GR OT 20 N is a white, odourless long-term grease based on a low-viscosity perfluorinated polyether (PFPE) oil and a polytetrafluoroethylene (PTFE) thickener. This raw material selection enables excellent sliding friction results even at low temperatures.
High-temperature lubricating, sliding and sealing agent
UNISILKON TK M 1011 and UNISILKON TK M 1012 are lubricating, sliding and sealing agents based on silicone oil. They offer high thermal stability, are insoluble in water and resistant to many ambient media.
Low-temperature lubricating grease for high-speed, low-noise rolling bearings
ASONIC GLY 32 is a synthetic low-noise lubricating grease manufactured in a clean environment.
The product components used and the grease’s low base-oil viscosity yield a very high speed factor and a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.
Synthetic low-temperature greases with a light-coloured solid lubricant
Klubersynth LF 44-22 and Klubersynth LF 44-32 are synthetic, dynamically light low-temperature greases containing anticorrosion and antioxidation additives. They are based on synthetic hydrocarbon oil and a special lithium soap thickener. The greases, which are designed for very low temperatures, are resistant to water and contain a friction-reducing solid lubricant.
Synthetic refrigeration compressor lubricant
Klüber Summit RAB 68 is based on synthetic hydrocarbon oils and special additives. It is very stable at high temperatures while providing excellent low temperature properties at evaporator temperatures below -45°C. The solubility with the refrigerants listed below is excellent and the deposit formation and foaming tendency is considerably reduced compared to naphthenic refrigeration compressor oils.
