Kluber Summit RAB 68

Manufacturer: KLÜBER LUBRICATION (Germany)

Synthetic refrigeration compressor lubricant
Klüber Summit RAB 68 is based on synthetic hydrocarbon oils and special additives. It is very stable at high temperatures while providing excellent low temperature properties at evaporator temperatures below -45°C. The solubility with the refrigerants listed below is excellent and the deposit formation and foaming tendency is considerably reduced compared to naphthenic refrigeration compressor oils.

Benefits for your application

for reciprocating, rotary and centrifugal compressors using ammonia and R-22. Also suitable in context with R-11, R-12, R-13, R-113, R-114, R-123, R-401 A, R-401 B, R-402 A, R-402 B, R-408 A, R-500, R-502 and R-503
excellent low-temperature properties at evaporator temperatures below -45 °C
completely miscible with mineral oils

Orther products

Product

Features, Application

Kluberlub LM 41-102

Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.

Klubersynth LEG 4 75 W 90

Fully synthetic high-performance gear oil with excellent low-temperature characteristics
Klubersynth LEG 4 75 W 90 is a fully synthetic high-performance gear oil based on polyalphaolefin (PAO). It was developed for application in rail vehicle gearboxes operating under high loads - especially at low temperatures.

Kluberquiet BQ 74-73 N

Low-noise rolling bearing grease for the long-term lubrication of high-speed rolling bearings
Kluberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearings operating at high temperatures.

Asonic GLY 32

Low-temperature lubricating grease for high-speed, low-noise rolling bearings
ASONIC GLY 32 is a synthetic low-noise lubricating grease manufactured in a clean environment.
The product components used and the grease’s low base-oil viscosity yield a very high speed factor and a low frictional torque, as can be seen from the results of measurements made on the low-temperature test rig.

Klubertemp GR OT 20 N

Long-term grease for low-temperature applications
Klubertemp GR OT 20 N is a white, odourless long-term grease based on a low-viscosity perfluorinated polyether (PFPE) oil and a polytetrafluoroethylene (PTFE) thickener. This raw material selection enables excellent sliding friction results even at low temperatures.

Polylub WH 2

Multi-purpose grease
POLYLUB WH 2 is a multifunctional lubricating grease based on mineral oil and a lithium soap thickener.
The grease offers good adhesion, excellent low-temperature properties and good corrosion protection.

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416