Klubersynth LF 44-22

Low-noise rolling bearing grease for the long-term lubrication of high-speed rolling bearings
Kluberquiet BQ 74-73 N is a rolling bearing grease based on synthetic hydrocarbon, ester oil and urea. It was especially developed for the lubrication of high-speed ball bearings operating at high temperatures.

Synthetic refrigeration compressor lubricant
Klüber Summit RAB 68 is based on synthetic hydrocarbon oils and special additives. It is very stable at high temperatures while providing excellent low temperature properties at evaporator temperatures below -45°C. The solubility with the refrigerants listed below is excellent and the deposit formation and foaming tendency is considerably reduced compared to naphthenic refrigeration compressor oils.

Long-term grease for low-temperature applications
Klubertemp GR OT 20 N is a white, odourless long-term grease based on a low-viscosity perfluorinated polyether (PFPE) oil and a polytetrafluoroethylene (PTFE) thickener. This raw material selection enables excellent sliding friction results even at low temperatures.

Dynamically light, long-term lubricating grease
ISOFLEX LDS 18 SPECIAL A is a dynamically light long-term grease for plain and rolling bearings. It consists of ester oil, mineral oil and lithium soap. The product is resistant to ageing, oxidation and water, and it protects reliably against corrosion.

Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.

Lubricating and corrosion protection oil with good low-temperature properties
Klübersynth MZ 4-17 is a fully synthetic lubricating and corrosion protection oil with good low-temperature properties. Apart from protecting against corrosion even when exposed to salt water, Klübersynth MZ 4-17 shows good antiwear properties.