Lubricating oils for the food and pharmaceutical industries
PARALIQ P 12 and P 40 are based on medically pure special oils which are neutral in odour and taste acc. to the European Pharmacopoeia (medical white oil).
PARALIQ P 12 and P 40 are NSF H1, 3H registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Benefits for your application
Based on medically pure oils
NSF H1 and NSF 3H-registered supporting process reliability
NSF ISO 21469 certified - supports compliance with the hygienic requirements of your production.
Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Long-term corrosion preventive, effective rust remover
CONTRAKOR FLUID H 1 is a thin-bodied, versatile lubricant based on mineral oil.
This long-term anti-corrosion agent offers excellent lubricity, improves sliding and has good penetrating properties, which makes it highly effective for use as a rust remover.
It is particularly useful in workshops, where a wide variety of lubricating jobs require quick and uncomplicated handling.
Synthetic lubricating oil for use in the food and pharmaceutical industries
PARALIQ 91 Spray is a food-grade lubricating oil based on a ester oil which has been developed as release agent for tins, moulds, cutting boards and other solid surfaces in contact with foodstuffs. It is neutral in odour and taste.
It is NSF H1, 3H registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries...
High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250 °C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.
High-temperature chain oils
All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low.
Our synthetic ester oils clearly meet these requirements. With our Klubersynth CH 2 series, we have found the right solution for you.
Air-drying, easy-to-apply bonded coating based on MoS2
MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS2), an organic binder and an inflammable solvent mixture.
MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450°C.
