Synthetic lubricating oil for use in the food and pharmaceutical industries
PARALIQ 91 Spray is a food-grade lubricating oil based on a ester oil which has been developed as release agent for tins, moulds, cutting boards and other solid surfaces in contact with foodstuffs. It is neutral in odour and taste.
It is NSF H1, 3H registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries...
Benefits for your application
Neutral in taste and odour
NSF H1 and NSF 3H registered supporting process reliability
Adhesive lubricant containing graphite
GRAFLOSCON CA ULTRA SPRAY is a solvent-containing mineral oil base adhesive lubricant with a high content of solid particles (fine graphite) applied by spray can. It contains an Al complex soap, can carry extreme loads and has good anticorrosion properties.
It does not contain bitumen, heavy metals or chlorine. The propellant is free from CFC.
Cleaner / degreaser for the food-processing and pharmaceutical industries
Klüberfood NK1 Z 8-001 Spray is an organic solvent cleaning agent. NSF K1 and NSF K3-registered (registration number 143557) for applications in the food-processing and pharmaceutical industries.
Air-hardening PTFE bonded coating
FLUOROPAN T 20 Spray is a whitish-transparent, air-hardening bonded coating based on PTFE and an organic binder.
When FLUOROPAN T 20 Spray has been applied and hardened, it offers high wear resistance, a low friction coefficient and no stick slip at low speeds. Its adhesion on iron and non-ferrous metals and solvent-resistant plastics as well as wood is good.
Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Lubricating oils for the food and pharmaceutical industries
PARALIQ P 12 and P 40 are based on medically pure special oils which are neutral in odour and taste acc. to the European Pharmacopoeia (medical white oil).
PARALIQ P 12 and P 40 are NSF H1, 3H registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
Adhesive lubricant containing graphite
GRAFLOSCON CA 901 ULTRA, a solvent-containing mineral oil based adhesive lubricant with a high content of solids, is applied by spray can.
This spray is extremely adhesive, resistant to high pressure, and has good anti-corrosion properties.
