Mineral oil-based special lubricants
STRUCTOVIS HD is a special lubricant series based on mineral oil and available in different viscosity grades.
All STRUCTOVIS HD types offer good wear and corrosion protection. The STRUCTOVIS types provided with an adhesion improver are extremely adhesive thus reducing considerably the risk of contamination due to oil leakage, especially at high chain speeds. The STRUCTOVIS types of higher viscosity (AHD to CHD) may also reduce noise of chains.
Synthetic rolling and plain bearing greases
ISOFLEX TOPAS NB 52, NB 152 are rolling and plain bearing greases based on a synthetic hydrocarbon oil and a barium complex soap. The special barium-soap thickener used in the greases offers good load-carrying capacity as well as resistance to water and ambient media unlike other soap-based thickeners. Both products show good protection against corrosion as well as oxidation and ageing stability. The Kluber barium complex soap is ELINCS-registered and approved by GASG (Global Automotive Stakeholders Group).
Air-hardening PTFE bonded coating
FLUOROPAN T 20 Spray is a whitish-transparent, air-hardening bonded coating based on PTFE and an organic binder.
When FLUOROPAN T 20 Spray has been applied and hardened, it offers high wear resistance, a low friction coefficient and no stick slip at low speeds. Its adhesion on iron and non-ferrous metals and solvent-resistant plastics as well as wood is good.
Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.
High-temperature chain oils
All chain users aim at minimising lubricant consumption volumes to enhance their profitability. At the same time, they expect good wear protection and low residue formation to keep maintenance costs low.
Our synthetic ester oils clearly meet these requirements. With our Klubersynth CH 2 series, we have found the right solution for you.
Special lubricating greases for boundary friction conditions and tribo-corrosion
MICROLUBE GL 261, GL 262 greases are special lubricating greases on a mineral oil base, special lithium soap and the MICROLUBE additive package. Running-in wear is reduced to a minimum. In addition, the MICROLUBE additive package provides protection in the boundary friction regime, thus preventing tribo-corrosion. These greases have the capacity to absorb high pressures, and they have good anti-corrosion properties.
Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
