Klubertemp GR AR 555

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

High-temperature grease for slow-running bearings
Klubersynth BH 72-422 is a synthetic high-temperature grease containing ester as well as perfluorinated polyether (PFPE) oils, and a PTFE thickener.
 
This grease shows good oil retention at high temperature and is thermally stable, which enables Klubersynth BH 72-422 to extend your relubrication intervals at operating temperatures above 160°C up to 220°C.

Operational lubricant for open drives
Grafloscon C-SG 2000 Ultra is a sprayable adhesive lubricant with a mineral base oil. It contains aluminium complex soap and solid lubricant particles of fine graphite. It is resistant to high pressure and contains antiwear additives, adhesion improvers and corrosion inhibitors. The raw materials used for the manufacture of Grafloscon C-SG 2000 Ultra are free of bitumen, solvents and chlorine.

Synthetic fluid gear grease for the food processing and pharmaceutical industries
Klüberfood NH1 94-6000 is a fluid grease based on a highly refined synthetic hydrocarbon and a special calcium complex soap thickener.
Klüberfood NH1 94-6000 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Multi-purpose greases for rolling and plain bearings
CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap. They meet the rolling bearing grease requirements according to DIN 51825 K. Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication. The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.