Paraliq GB 363

Silicone spray
UNISILKON M 2000 Spray is a waterwhite, solvent-free silicone spray. It keeps rubber, plastic and leather surfaces smooth and supple.
UNISILKON M 2000 Spray is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Kluber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
The oils offer good oxidation stability due to the synthetic base oil, thus minimizing oxidation residues in the compressors and extending oil change intervals and the service life of oil filters and separators.
They are NSF H1 registered.

Synthetic high-performance gear oil for the food-processing and pharmaceutical industries with KlüberComp Lube Technology
Klubersynth UH1 6 is a synthetic high-performance gear oil based on PG satisfying the growing requirements and increasing power density of modern gears. It includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
It is approved by Flender, SEW, etc.

Synthetic barrier fluid for mechanical seals
Kluberfluid NH1 4-005 is based on a synthetic hydrocarbon oil and was developed for the lubrication of mechanical seals operating under various conditions in the chemical and pharmaceutical industries.
It is NSF H1 registered and therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Light-coloured high-temperature paste for the food-processing and pharmaceutical industries
Kluberpaste UH1 96-402 is a high-temperature paste designed for versatile assembly purposes in hygienically sensitive environments. It contains fully synthetic base oils and a special blend of ceramic solid lubricants.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, pharmaceutical industries.

Lubricating oils for the food and pharmaceutical industries
PARALIQ P 12 and P 40 are based on medically pure special oils which are neutral in odour and taste acc. to the European Pharmacopoeia (medical white oil).
PARALIQ P 12 and P 40 are NSF H1, 3H registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.