Kluberalfa YV 93-1202

Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Special grease for the lubrication of electrical switches, contacts and sensors
Kluberlectric KR 44-102 is a special grease for the lubrication of electrical switches, contacts and sensors. It consists of a PAO oil and lithium soap incorporating a UV indicator for quality inspection. It is intended especially for the protection and lubrication of copper, tin and silver surfaces against corrosion.

Synthetic heavy-duty grease for long-term lubrication
Klubersynth HBE 94-401 is a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klubersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used.

Long-term grease for rolling and plain bearings
STABURAGS NBU 12/300 KP is a rolling and plain bearing grease based on mineral oil and a barium complex soap thickener. It offers good wear protection and good pressure absorption.
STABURAGS NBU 12/300 KP is resistant to water and protects reliably against corrosion.

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. It is a contributor towards the supporting of food safety. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.

Spindle bearing grease
ISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.
It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water, media and oxidation.