Klubersynth HBE 94-401

Lubricating and assembly paste
ALTEMP Q NB 50 is a white/beige lubricating paste containing a mineral base oil, a barium complex soap and inorganic solid lubricants.
Besides its application as a universal assembly paste, this product offers benefits especially in friction points with small to minimum motion under high static and dynamic loads.

High-temperature lubricating greases
STABUTHERM GH 461 and STABUTHERM GH 462 are high-temperature lubricating greases based on mineral oil and polyurea. They have a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. They have feature highly effective anti-wear properties. The greases are very adhesive and resistant to water both under static and dynamic load. They are resistant to oxidation and provide reliable protection against corrosion.

High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250°C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

Grease for valves, fittings and plain bearings
SYNTHESO PROBA 270 and 330 are greases based on polyalkylene glycol and barium soap thickener for applications subject to cold and hot water, e.g. in autoclaves and high-temperature dyeing installations.

Lubricating grease for plain and rolling bearings
STABURAGS NBU 12 ALTEMP is a mineral oil based lubricating grease for plain and rolling bearings operating at low to medium speeds. It has proven effective in lubricating points subject to external vibrations or oscillations. Containing solid lubricants, STABURAGS NBU 12 ALTEMP protects against fretting corrosion and is resistant to hot water.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.