Paraliq GA 351

Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

White operating and priming lubricants
Kluberplex AG 11- 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.
These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.

Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings
PETAMO GY 193 is a synthetic high-temperature grease based on high-quality ester oils, polyurea thickener and special additives. The grease stands out for its excellent water resistance and corrosion protection.
With an above average base oil viscosity of approx. 160 mm²/s at 40°C, PETAMO GY 193 is suitable for manifold applications in machine building.

Operational lubricant for open drives
Grafloscon C-SG 2000 Ultra is a sprayable adhesive lubricant with a mineral base oil. It contains aluminium complex soap and solid lubricant particles of fine graphite. It is resistant to high pressure and contains antiwear additives, adhesion improvers and corrosion inhibitors. The raw materials used for the manufacture of Grafloscon C-SG 2000 Ultra are free of bitumen, solvents and chlorine.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.