HOTEMP SUPER N PLUS

Manufacturer: KLÜBER LUBRICATION (Germany)
High-temperature oil for continuous wood panel presses
HOTEMP SUPER N PLUS is a special high-temperature oil for use on the latest generation of continuous board presses subject to highest process temperatures and speeds.
HOTEMP SUPER N PLUS is an advanced product based on the HOTEMP...series with further development in terms of evaporation losses at temperatures between 230 and 260°C.
Benefits for your application:
  • Reduced energy consumption and improved efficiency due to advanced additives, even at very high temperatures
  • No lacquer-like residues formed under continuous total loss lubrication conditions
  • Low evaporation losses with reduced oil consumption and fume formation
  • Good adhesion and spreading properties, minimised contamination risk and effective lubricant supply to all friction points

Orther products

Product
Features, Application
High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.
Synthetic high-performance gear and high-temperature oil with KluberComp Lube Technology
Klubersynth GH 6 is a synthetic high-performance gear and high-temperature oil based on polyglycol. It includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GH 6 is approved by Siemens-Flender, SEW, MAAG Gears, etc.
High-temperature grease for slow-running bearings
Klubersynth BH 72-422 is a synthetic high-temperature grease containing ester as well as perfluorinated polyether (PFPE) oils, and a PTFE thickener. 
This grease shows good oil retention at high temperature and is thermally stable, which enables Klubersynth BH 72-422 to extend your relubrication intervals at operating temperatures above 160°C up to 220°C.
Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.
Synthetic high-performance gear and multipurpose oil with KlüberComp Lube Technology
Klubersynth GEM 4 N is a synthetic high-performance gear and multipurpose oil based on PAO. Klubersynth GEM 4 N includes KluberComp Lube Technology, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.
Klubersynth GEM 4 N is approved by Siemens-Flender, SEW, MAAG Gears, etc.
Synthetic high-temperature chain oil
HOTEMP SUPER CH 2-100 is a synthetic high-temperature chain oil based on a low-viscous, solvent-free and thermally stable ester oil.
The special additives contained in HOTEMP SUPER CH 2-100 ensure good wear protection and lubricity.
HOTEMP SUPER CH 2-100 has only low evaporation losses at high operating temperatures.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16