Kluberlub PHB 71-461

Manufacturer: KLÜBER LUBRICATION (Germany)
High-temperature lubricating grease
Kluberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions. Kluberlub PHB 71-461 may be applied via centralized lubrication equipment.
Kluberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions.
Benefits for your application:
  • High-temperature lubricating grease for rolling bearings up to 180°C for low to medium speeds
  • Good pumpability in most commercially available lubrication systems
  • Blue colour, hence less risk of confusion / mixing etc.
  • Good wear protection and high load-carrying capacity
  • Good corrosion protection
  • Resistant to water

Orther products

Product
Features, Application
High-temperature and long-term greases for rolling bearings subject to high temperatures in continuous presses
Klubertemp HB 53-391 and Klubertemp HB 53-392 are synthetic long-term greases based on perfluorinated polyether oils. They were especially designed for the lubrication of roller bearings subject to high loads and temperatures in continuous presses. Klubertemp HB 53 greases ensure a good oil supply to the bearing throughout the entire service interval and offer high thermal stability as well as corrosion protection.
High-temperature grease for slow-running bearings
Klubersynth BH 72-422 is a synthetic high-temperature grease containing ester as well as perfluorinated polyether (PFPE) oils, and a PTFE thickener. 
This grease shows good oil retention at high temperature and is thermally stable, which enables Klubersynth BH 72-422 to extend your relubrication intervals at operating temperatures above 160°C up to 220°C.
High-temperature cleaning and lubricating oil for chains
Klubertherm CH 2-140 has improved thermal stability and load carrying capacity, which enables it to provide good wear protection for bending rods/bolts, rollers and chains during normal production. At the same time, the cleaning additives in the oil dissolve/suspend the pasty residues and flush them away from the lubrication point, thus providing a good cleaning effect without disturbing the production schedule.
Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Kluber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.
High-temperature and long-term grease for rolling bearings
Kluberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.
Synthetic high-temperature chain oil
HOTEMP SUPER CH 2-100 is a synthetic high-temperature chain oil based on a low-viscous, solvent-free and thermally stable ester oil.
The special additives contained in HOTEMP SUPER CH 2-100 ensure good wear protection and lubricity.
HOTEMP SUPER CH 2-100 has only low evaporation losses at high operating temperatures.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16