Air - operated oil pump, ratio 1:3, for wall mounting
Manufacturer:ASSALUB (Sweden)
Pneumatic oil pump, ratio 1:3, are suitable for pumping oil from a storage centre, to the work place via transfer lines, hose reels and meters.
With wall bracket, hose and suction tube kit. Part Number: 0102164
Part number: 0102163
Specifications:
Output: 20 litres per minute with an SAE30 oil at 0.5 MPa (70 psi)
Pneumatic oil pump, ratio 1:1, are used for pumping low-viscosity oils over short distances, e.g. transferring from one vessel to another. This pump is also suitable for use with diesel fuel. Part Number: 0102170
Pneumatic oil pump, ratio 1:3, are suitable for pumping oil from a storage centre, to the work place via transfer lines, hose reels and meters.
With PVC suction tube and 2″ drum bung fitting. The tube can easily be shortened to suit 1/4-drum and pails. Part Number: 0102164
Part Number: 0102162
Pneumatic oil pump, ratio 1:1, are used for pumping low-viscosity oils over short distances, e.g. transferring from one vessel to another. This pump is also suitable for use with diesel fuel.
Complete with a PVC suction tube and 2″ drum bung fitting. The tube can easily be shortened to suit 1/4-drum and pails. Part Number: 0102170
Part Number: 0102160
Pneumatic oil pump, ratio 1:6, are recommended for pumping very high viscosity oils or for long distance pumping of oil.
with wall bracket, hose, and suction tube kit. Part Number: 0102099
Pneumatic oil pump, ratio 1:3, are suitable for pumping oil from a storage centre, to the work place via transfer lines, hose reels and meters. Part Number: 0102164
Pneumatic oil pump, ratio 1:6, are recommended for pumping very high viscosity oils or for long distance pumping of oil.
With 2″ drum bung fitting for mounting in the drum lid. The air-operated grease pump can be equipped with a special follower plate for maximum emptying. Part Number: 0102100
