Air-operated oil pump 1:6 ratio, for wall mounting
Manufacturer:ASSALUB (Sweden)
Pneumatic oil pump, ratio 1:6, are recommended for pumping very high viscosity oils or for long distance pumping of oil.
with wall bracket, hose, and suction tube kit. Part Number: 0102099
Specifications:
Output: 23 l/min with an SAE30 oil at 0.5 MPa (70 psi)
Air pressure, min-max: 0.3-1.0 MPa/43-150 psi
Supply pressure at 0,8 MPa: Operational pressure 4.8 MPa/700 psi
Oil outlet: ISO-G3/4 female
Oil inlet: ISO-G1 female
Air connection: ISO-G1/4 female
Materials of construction: Anodized aluminium, steel, stainless steel, brass, PVC
Seal material: Nitrile rubber
Suction hose length: L=1.6 m
Steel suction tube with check valve: Ø32 mm L=940 mm
Pneumatic oil pump, ratio 1:3, are suitable for pumping oil from a storage centre, to the work place via transfer lines, hose reels and meters.
With PVC suction tube and 2″ drum bung fitting. The tube can easily be shortened to suit 1/4-drum and pails. Part Number: 0102164
Part Number: 0102162
Pneumatic oil pump, ratio 1:1, are used for pumping low-viscosity oils over short distances, e.g. transferring from one vessel to another. This pump is also suitable for use with diesel fuel. Part Number: 0102170
Pneumatic oil pump, ratio 1:1, are used for pumping low-viscosity oils over short distances, e.g. transferring from one vessel to another. This pump is also suitable for use with diesel fuel.
With wall bracket, hose and suction tube kit. Part Number: 0102170
Part Number: 0102207
Pneumatic oil pump, ratio 1:6, are recommended for pumping very high viscosity oils or for long distance pumping of oil.
With 2″ drum bung fitting for mounting in the drum lid. The air-operated grease pump can be equipped with a special follower plate for maximum emptying. Part Number: 0102100
Pneumatic oil pump, ratio 1:3, are suitable for pumping oil from a storage centre, to the work place via transfer lines, hose reels and meters.
With wall bracket, hose and suction tube kit. Part Number: 0102164
Part number: 0102163
Pneumatic oil pump, ratio 1:1, are used for pumping low-viscosity oils over short distances, e.g. transferring from one vessel to another. This pump is also suitable for use with diesel fuel.
Complete with a PVC suction tube and 2″ drum bung fitting. The tube can easily be shortened to suit 1/4-drum and pails. Part Number: 0102170
Part Number: 0102160
