Kluberfood 4 NH1-32

Manufacturer: KLÜBER LUBRICATION (Germany)

Synthetic hydraulic oils for the food and pharmaceutical industries
Kluberfood 4 NH 1-15...100 oils are hydraulic oils based on synthetic hydrocarbons. Klüberfood NH 1 oils offer good oxidation stability due to the synthetic base oil, also good stability at low temperatures and protection against friction and wear. They meet HLP requirements acc. to DIN 51524 part 2.
Apart from their excellent corrosion stability, Kluberfood 4 NH 1 oils have a good water separation ability.

Benefits for your application

Fully synthetic base oil to support extended oil change intervals and reduced operating cost in hydraulic systems
Reduced contaminant build up and valve blockages compared to mineral hydraulic oils as a result of the improved oil stability
NSF H1 registered supporting process reliability

Orther products

Product

Features, Application

Kluberpharma UH1 4-220/4-460

Special synthetic lubricating oils for the pharmaceutical industry
Kluberpharma UH1 4-220/4-460 are specially designed synthetic lubricating oils for the lubrication of steel punches and bronze guides in pharmaceutical tablet presses, especially in the field of high-performance manufacture of tablets.
They are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

Klubersynth UH1 64-1302

Synthetic lubricating grease for the food and pharmaceutical industry
Klübersynth UH1 64-1302 was specifically developed for grease-lubricated roller chains operating under high loads in the mixed friction regime in continuous flow sterilizers. Klübersynth UH1 64-1302 thus offers excellent wear protection even under extreme lubricating conditions.
Being highly resistant to water and steam, this adhesive lubricating grease is particularly suitable for applications in a saturated steam atmosphere at normal sterilisation temperatures.

Klubersynth UH1 14-222

Synthetic lubricating grease for universal application in the food-processing and pharmaceutical industries
Klubersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical.
Klubersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Kluberfluid NH1 4-005

Synthetic barrier fluid for mechanical seals
Kluberfluid NH1 4-005 is based on a synthetic hydrocarbon oil and was developed for the lubrication of mechanical seals operating under various conditions in the chemical and pharmaceutical industries.
It is NSF H1 registered and therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical industries.

UNISILKON M 2000 Spray

Silicone spray
UNISILKON M 2000 Spray is a waterwhite, solvent-free silicone spray. It keeps rubber, plastic and leather surfaces smooth and supple.
UNISILKON M 2000 Spray is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

Klubersynth UH1 14-151

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. It shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical...

Technical service

Organizing technical training courses, technical workshops at customers' factories

Lubrication consultation and recommendation

Automatic lubrication system design and installation

Gap measurement in vertical grinding machine

Repair lubrication spray service

Open gear inspection and adjustment

Address: Room 503, 5^thFloor, 101 Lang Ha Building, Dong Da Dist., Hanoi, Vietnam
Phone: (+84.24) 3562 6208
Hotline: +84 911 54 2416
Email: info@vuminh.com.vn

Address: 68 Le Manh Trinh Street, Phuoc My Ward, Son Tra District, Da Nang City, Vietnam

Phone: (+84.236) 394 3203

Hotline: +84 911 57 2416

Address: Room 10, 9^thFloor, An Khang B Building, An Phu Ward, Thu Duc City, Ho Chi Minh City, Vietnam
Phone: (+84.28) 6281 3200
Hotline: +84 911 04 2416