High-temperature lubricating, sliding and sealing agent
UNISILKON TK M 1011 and UNISILKON TK M 1012 are lubricating, sliding and sealing agents based on silicone oil. They offer high thermal stability, are insoluble in water and resistant to many ambient media.
Premium sliding agent for valves, fittings and installations carrying oxygen under very high partial pressure
Kluberalfa YV 93-1202 is a white sliding agent with a good wetting capacity on the basis of perfluorinated polyether oils and solid lubricants.
It provides an exceptionally high stability to oxygen surges and very good resistance to various chemicals.
It is registered according to NSF H1, complies with FDA 21 CFR § 178.3570 and can be used in the food-processing industry.
Special lubricating grease for valves eg under vacuum
BARRIERTA L 55/3 HV is a synthetic, non-flammable and pasty sliding agent with good wetting properties for high-performance valves. It is based on PFPE oil and PTFE and can be used for temperatures from -25°C to 260°C.
BARRIERTA L 55/3 HV is a special grease for valves offering a long-term effect when exposed to hot water, boiling water, and steam.
BARRIERTA L 55/3 HV is resistant to chemicals and aggressive media such as concentrated acids, alkaline solutions and organic solvents (except for fluorinated hydrocarbon solvents, strong, bases, earth/alkali metals and Lewis acids). BARRIERTA L 55/3 HV is almost neutral to elastomers and plastics.
Special lubricating grease for drinking water taps containing e.g. EPDM and/or NBR elastomers
Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE. With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life. Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200. Klubersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.
Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.
Synthetic lubricating grease for drinking water taps
Klubersynth V 64-300 is a special lubricating grease based on a synthetic oil with a low content of silicone oil and an inorganic thickener.
This product complies with the recommendations pertaining to synthetic materials in contact with drinking water set forth by the German Health Authority. It has a high load-carrying capacity and excellent wetting properties.
Klubersynth V 64-300 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.
Special lubricating grease with EP additives, compatible with EPDM
SYNTHESO GLEP 1 is a special lubricant for a wide variety of applications with an almost neutral behaviour towards many elastomers (including EPDM) and plastics (except PC and ABS). SYNTHESO GLEP 1 can be used in a wide service temperature range and offers efficient protection against wear, good adhesion and resistance to water.
