Kluberplex BEM 41-132

Synthetic lubricating grease for the food and pharmaceutical processing industry
Klubersynth UH1 14-151 was especially developed for the food processing and pharmaceutical industry. It shows good anti-wear properties, water resistance and corrosion protection as well as a high ageing and oxidation stability.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical...

Lubricant for rolling and plain bearings subject to high loads
Kluberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite.
Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

Multi-purpose lubricant for high-temperature applications
Klubertemp GR AR 555 is a white, homogeneous long-term grease based on a perfluorinated polyether oil (PFPE) and polytetrafluoroethylene (PTFE).
Klubertemp GR AR 555 offers good corrosion protection and high evaporation stability especially for high-temperature applications.

High-performance fluid grease for long-term lubrication
Klubersynth BEM 44-4600 is based on high-viscosity PAO oil and a special lithium soap, which prevents components from leaking due to its thixotropic behavior. Compared to other fluid greases it provides a very good thermal stability due to its synthetic composition thus ensures a longer service life of the lubricant and protects against early wear of the components. It offers good compatibility with other fluid greases based on mineral oil and PAO, thus it helps in a smooth change- over to BEM 44-4600.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.

Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.