Kluberplex BEM 41-141

High-temperature lubricating grease
Kluberlub PHB 71-461 is a special high-temperature lubricating grease based on mineral oil and polyurea. It is suitable for a wide service temperature range and can be used up to 180°C under continuous relubrication conditions. Kluberlub PHB 71-461 may be applied via centralized lubrication equipment.
Kluberlub PHB 71-461 incorporates special EP additives ensuring good wear protection under high load conditions.

Graphite based operational lubricant for open gear drives
Because of its unique chemical composition based on an aluminium soap thickener, the GRAFLOSCON C-SG 0 ULTRA provide good adhesion that protects the tooth flank even at extreme loads.The life of the gear is enhanced by the presence of fine graphite particles that form a protective layer and prevent damage.
The vibrations and temperature difference across the tooth flank are reduced. The gears are also protected against corrosion due to the special additives.

Premium sliding agent for valves, fittings and installations carrying oxygen under very high partial pressure
Kluberalfa YV 93-1202 is a white sliding agent with a good wetting capacity on the basis of perfluorinated polyether oils and solid lubricants.
It provides an exceptionally high stability to oxygen surges and very good resistance to various chemicals.
It is registered according to NSF H1, complies with FDA 21 CFR § 178.3570 and can be used in the food-processing industry.

Open Gear Lubricants
Kluberlub OG 11 BH Series are Open Gear Lubricants based on mineral oil, Aluminum Complex Soap thickener and MX technology based on Organo Molybdenum Complex.  
The high viscosity base fluids used in the lubricants provide extreme pressure (EP) and antiwear characteristics to the lubricant.

Heavy-duty grease for highly-loaded rolling bearings operating at low speeds
Kluberlub BE 41-1501 is designed to meet the requirements of rolling bearings subject to extreme conditions.
FAG FE 8 tests have confirmed the effectiveness of Kluberlub BE 41-1501 under these conditions and it is approved by various bearing manufacturers, e.g. FAG, to be used for applications in low-speed rolling bearings subject to very high loads and shocks, for example in roller presses and bowl mill crushers.

Synthetic heavy-duty grease for long-term lubrication
Klubersynth HBE 94-401 is a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klubersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used.