Klubersynth HBE 94-401

White operating and priming lubricants
Kluberplex AG 11- 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.
These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.

High-temperature grease for rolling bearings
Klubersynth HB 72-52 is a synthetic high-temperature grease. It is based on special ester oil, a polyurea thickener and selected additives and covers a wide service temperature range. The grease is compatible with EPDM, offers excellent running times, good corrosion protection as well as water washout resistance.

Spindle bearing grease
VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil and mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion and wear protection, resistance to water and media as well as ageing and oxidation stability.

Rolling and plain bearing greases
STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.

Greases containing solid lubricants
STABURAGS NBU 12 G 10 and 30 G are lubricating greases based on mineral oil, barium complex soap and solid lubricants. Both greases offer good wear protection and are suitable for high loads in the mixed friction regime. In addition, they protect against corrosion and are resistant to water as well as many diluted alkaline and acid solutions.

Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.