Varilub NBU 15/300

Manufacturer: KLÜBER LUBRICATION (Germany)
Spindle bearing grease
VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil and mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion and wear protection, resistance to water and media as well as ageing and oxidation stability.
Benefits for your application
  • Savings in costs for bearings due to the good corrosion and wear protection as well as pressure absorption capacity of the grease, therefore long service life and maintenance intervals
  • Reduced wastewater disposal costs due to good water resistance resulting in a long service life and relubrication intervals
  • Trouble-free operation of machines due to easy pumpability and metering in central lubrication systems

Orther products

Product
Features, Application
Lubricating grease with high resistance to ambient media
STABURAGS NBU 30 is a lubricating grease based on mineral oil and a barium complex soap.
STABURAGS NBU 30 offers good wear and corrosion protection as well as resistance to water and many diluted alkaline and acidic solutions, thus extending relubrication intervals and reducing operating costs.
Hotemp 2000

Hotemp 2000

Mã SP:
High-temperature lubricating oil
HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.
HOTEMP 2000 is resistant to temperatures up to 250°C and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.
Lubricating greases for extreme requirements
Kluberplex BE 31-102…-222…-502 are lubricating greases based on mineral oil and special calcium soap. They offer high resistance to mechano - dynamical loads and good adhesion properties. Kluberplex BE 31-102…-222…-502 are highly resistant to media, water and water vapour.
Rolling and plain bearing greases
STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.
High-temperature lubricating grease for bearings and valves
Kluberlub BVH 71-461 is a special lubricating grease based on mineral oil/synthetic hydrocarbon oil/polyurea. It has a wide service temperature range and is suitable for rolling bearings up to a service temperature of 160°C.
Kluberlub BVH 71-461 ensures excellent wear protection, and its EP additives provide a high pressure absorption capacity.
It is very adhesive and resistant to water under static and dynamic loads.
Kluberlub BVH 71-461 is also particularly resistant to oxidation and ageing and reliably protects against corrosion. It has an especially high sealing effect in coke oven valves.
Paraliq GTE 703

Paraliq GTE 703

Mã SP:
Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.
Ha Noi: 09115 424 16 Da Nang: 09115 724 16 Ho Chi Minh: 09110 424 16