Rolling and plain bearing greases
STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.
Synthetic lubricating grease for valves, fittings with EPDM seals
PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.
It is registered as NSF H1 and complies with FDA 21 CFR § 178.3570. It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical.
It may also be used for very low-load rolling bearings used in the beverage industry where an EPDM-compatible H1 lubricant is required.
Grease for valves, fittings and plain bearings
SYNTHESO PROBA 270 and 330 are greases based on polyalkylene glycol and barium soap thickener for applications subject to cold and hot water, e.g. in autoclaves and high-temperature dyeing installations.
High-temperature lubricating greases
STABUTHERM GH 461 and STABUTHERM GH 462 are high-temperature lubricating greases based on mineral oil and polyurea. They have a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. They have feature highly effective anti-wear properties. The greases are very adhesive and resistant to water both under static and dynamic load. They are resistant to oxidation and provide reliable protection against corrosion.
Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.
Synthetic heavy-duty grease for long-term lubrication
Klubersynth HBE 94-401 is a lubricating grease based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical loads providing excellent wear protection. Moreover, Klubersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used.
Spindle bearing grease
VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil and mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion and wear protection, resistance to water and media as well as ageing and oxidation stability.
