Running-in lubricant for open drives
Grafloscon B-SG 00 Ultra is a sprayable running-in lubricant with a mineral base oil. It contains aluminium stearate as a thickener and solid lubricant particles of fine graphite. The lubricant is free from bitumen, heavy metals, solvents and raw materials containing chlorine.
GRAFLOSCON B-SG 00 ULTRA reduces surface roughness and improves the tooth flank quality which makes it also suitable for corrective lubrication if tooth flanks are damaged.
Benefits for your application
Grafloscon B-SG 00 Ultra reduces surface roughness and improves tooth flank quality thus contributing to a longer service life of drives and reduced maintenance costs.
Operational open gear lubricant for large girth gear drives
Kluberfluid C-PG 17 Ultra is based on an innovative synthetic base oil and was developed to meet your increasing demands of modern day open gears.
The high viscosity index of Kluberfluid C-PG 17 Ultra provides the highest film thicknesses and thus the highest load carrying capacity, even if your gears are running at elevated temperatures.
It exceeds the requirements of ANSI/AGMA 6014-B15 Annex D and FLSmidth Minerals Gear Set Lubrication Guidelines.
High-temperature lubricating paste
Wolfracoat C is a grey high-temperature lubricating paste containing metal solid lubricant pigments (e.g. copper, graphite). Wolfracoat C counteracts excessive friction, wear and seizing at lubricating points subject to high loads. Wolfracoat C forms a thermally stable lubricating film. At temperatures above 200 °C, the solid lubricants remain in the friction points and protect against tribocorrosion and fretting of e.g. fits up to 1200°C.
Operational lubricant for large girth gear drives
Kluberfluid C-F 8 ULTRA is a newly developed lubricant especially for use on medium-size to large girth gear drives. It is based on a mixture of synthetic hydrocarbons and mineral oil.
Kluberfluid C-F 8 ULTRA provides extremely good adhesion, resistance to high pressure and exceptional wear protection. It is suitable for use at component temperatures up to 120°C.
Kluberfluid C-F 8 ULTRA corresponds to ANSI/AGMA 9005-E02 annex D.
Synthetic air compressor oils for oil change intervals up to 8,000 operating hours
Kluber Summit SB oils are air compressor oils based on synthetic hydrocarbons and additives. These oils are miscible with mineral oils and synthetic hydrocarbon oils, but not with oils based on polyglycol.
Kluber Summit SB oils offer excellent oxidation and ageing stability and show a good viscosity-temperature behaviour.
Adhesive lubricant
GRAFLOSCON C-SG 500 PLUS, a sprayable adhesive lubricant based on mineral oil, is aluminium complex saponified and contains solid lubricant (fine graphite). It is resistant to high pressure and is provided with anti-wear additives, adhesion improvers and corrosion inhibitors.
GRAFLOSCON C-SG 500 PLUS is free from bitumen, solvents and lead.
High-temperature lubricating compound
WOLFRACOAT C FLUID is a viscous high-temperature release agent and lubricating compound based on a mineral and ester oil mixture. It contains solid lubricants, metal pigments and an inorganic thickener. The base fluid starts to evaporate at approx. 200°C, leaving a solid lubricant film, which separates frictional surfaces (dry lubrication).
