Klubersynth HBE 94-401

Special lubricating grease for drinking water, beverage and heating valves and fittings
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. It is resistant to cold and hot water, superheated steam up to approx. 130°C as well as industrial cleaning agents and disinfectants. It is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products.

Spindle bearing grease
VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil and mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion and wear protection, resistance to water and media as well as ageing and oxidation stability.

Rolling and plain bearing greases
STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.

Greases containing solid lubricants
STABURAGS NBU 12 G 10 and 30 G are lubricating greases based on mineral oil, barium complex soap and solid lubricants. Both greases offer good wear protection and are suitable for high loads in the mixed friction regime. In addition, they protect against corrosion and are resistant to water as well as many diluted alkaline and acid solutions.

Rolling bearing and high-pressure grease
STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water.

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries
PARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.
PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.