Hotemp 2000

High-temperature screw paste
Kluberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Kluberpaste HEL 46-450 is suitable for a temperature range between -40°C and 1000°C. In the normal temperature range (i.e. below 200°C) it shows good anticorrosion behaviour and good water resistance. Above 200°C it acts as a dry lubricant.

High-temperature grease for slow-running bearings
Klubersynth BH 72-422 is a synthetic high-temperature grease containing ester as well as perfluorinated polyether (PFPE) oils, and a PTFE thickener.
This grease shows good oil retention at high temperature and is thermally stable, which enables Klubersynth BH 72-422 to extend your relubrication intervals at operating temperatures above 160°C up to 220°C.

Tried-and-tested grease for the high-temperature and long-term lubrication of rolling bearings
PETAMO GY 193 is a synthetic high-temperature grease based on high-quality ester oils, polyurea thickener and special additives. The grease stands out for its excellent water resistance and corrosion protection.
With an above average base oil viscosity of approx. 160 mm²/s at 40°C, PETAMO GY 193 is suitable for manifold applications in machine building.

Air-drying, easy-to-apply bonded coating based on MoS₂
MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS₂), an organic binder and an inflammable solvent mixture.
MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450°C.

Light-coloured high-temperature paste for the food-processing and pharmaceutical industries
Kluberpaste UH1 96-402 is a high-temperature paste designed for versatile assembly purposes in hygienically sensitive environments. It contains fully synthetic base oils and a special blend of ceramic solid lubricants.
It is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, pharmaceutical industries.

High-temperature lubricating paste
Wolfracoat C is a grey high-temperature lubricating paste containing metal solid lubricant pigments (e.g. copper, graphite). Wolfracoat C counteracts excessive friction, wear and seizing at lubricating points subject to high loads. Wolfracoat C forms a thermally stable lubricating film. At temperatures above 200°C, the solid lubricants remain in the friction points and protect against tribocorrosion and fretting of e.g. fits up to 1200°C.