Kluberoil 4 UH1-32...1500 N

Low-temperature greases for slides and small gears
Kluberlub LM 41-32 N and Kluberlub LM 41-102 are special greases based on mineral oil and a lithium soap thickener. Due to their low base oil viscosity Kluberlub LM 41-32 N and Kluberlub LM 41-102 are suitable for temperatures down to –40°C.

Synthetic long-term grease for rolling and plain bearings, linear motion guides
ISOFLEX TOPAS NCA 52 is a synthetic long-term grease with good low-temperature properties. It has a good load-carrying capacity and ensures smooth running even at high speeds and accelerations.
The thickener made of special calcium soap ensures good adhesion to the component and good resistance to media.
The additives contained in ISOFLEX TOPAS NCA 52 increase wear protection.

High-performance fluid grease for long-term lubrication
Klubersynth BEM 44-4600 is based on high-viscosity PAO oil and a special lithium soap, which prevents components from leaking due to its thixotropic behavior. Compared to other fluid greases it provides a very good thermal stability due to its synthetic composition thus ensures a longer service life of the lubricant and protects against early wear of the components. It offers good compatibility with other fluid greases based on mineral oil and PAO, thus it helps in a smooth change- over to BEM 44-4600.

Special lubricating grease for rolling and plain bearings
Klüberlub BE 71-501 is a light-coloured lubricating grease which offers good compatibility with nonferrous metals like those used for example as plain bearing material. Due to its special formulation and solid lubricants, wear is low when exposed to rotating and oscillating motion and high impact loads. Klüberlub BE 71-501 is resistant to water and has a good sealing effect. The additives contained in this product enhance its ageing resistance.

Lubricating oils for slideways and guideways
LAMORA D oils offer excellent lubricity also at low sliding speeds, enabling constant and precise feed motion of workpiece and tool slides. They ensure good wetting of the sliding surfaces and a high load-carrying capacity, especially of slideways with plastic coatings. Tests at SKC Schmidt GmbH & Co. (formerly Hans Schmidt Gleittechnik GmbH & Co.) have shown that the oils attain "good" to "very good" results both in terms of their coefficients of adhesion and their demulsifying behaviour in contact with customary cooling lubricants.
LAMORA D oils are in compliance with ISO 6743 part 13 GA and GB.

Fluid gear grease
MICROLUBE GB 00 is a special mineral oil based grease free from solid lubricants. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, shows good wetting behaviour, water resistance and backflow behaviour.